A. The Administrative Process Act and Virginia Register Act provide that state regulations may incorporate documents by reference. Throughout these regulations, documents of the types specified below have been incorporated by reference.

1. United States Code.

2. Code of Virginia.

3. Code of Federal Regulations.

4. Federal Register.

5. Technical and scientific reference documents.

Additional information on key federal regulations and nonstatutory documents incorporated by reference and their availability may be found in subsection E of this section.

B. Any reference in these regulations to any provision of the Code of Federal Regulations (CFR) shall be considered as the adoption by reference of that provision. The specific version of the provision adopted by reference shall be that contained in the CFR (2020) (2022) in effect July 1, 2020 2022. In making reference to the Code of Federal Regulations, 40 CFR Part 35 means Part 35 of Title 40 of the Code of Federal Regulations; 40 CFR 35.20 means § 35.20 in Part 35 of Title 40 of the Code of Federal Regulations.

C. Failure to include in this section any document referenced in the regulations shall not invalidate the applicability of the referenced document.

D. Copies of materials incorporated by reference in this section may be examined by the public at the central office of the Department of Environmental Quality, 1111 East Main Street, Suite 1400, Richmond, Virginia, between 8:30 a.m. and 4:30 p.m. of each business day.

E. Information on federal regulations and nonstatutory documents incorporated by reference and their availability may be found below in this subsection.

1. Code of Federal Regulations.

a. The provisions specified below from the Code of Federal Regulations (CFR) are incorporated herein by reference.

(1) 40 CFR Part 50 -- National Primary and Secondary Ambient Air Quality Standards.

(a) Appendix A-1 -- Reference Measurement Principle and Calibration Procedure for the Measurement of Sulfur Dioxide in the Atmosphere (Ultraviolet Fluorescence Method).

(b) Appendix A-2 -- Reference Method for the Determination of Sulfur Dioxide in the Atmosphere (Pararosaniline Method).

(c) Appendix B -- Reference Method for the Determination of Suspended Particulate Matter in the Atmosphere (High-Volume Method).

(d) Appendix C -- Measurement Principle and Calibration Procedure for the Continuous Measurement of Carbon Monoxide in the Atmosphere (Non-Dispersive Infrared Photometry).

(e) Appendix D -- Measurement Principle and Calibration Procedure for the Measurement of Ozone in the Atmosphere.

(f) Appendix E -- Reserved.

(g) Appendix F -- Measurement Principle and Calibration Procedure for the Measurement of Nitrogen Dioxide in the Atmosphere (Gas Phase Chemiluminescence).

(h) Appendix G -- Reference Method for the Determination of Lead in Suspended Particulate Matter Collected from Ambient Air.

(i) Appendix H -- Interpretation of the National Ambient Air Quality Standards for Ozone.

(j) Appendix I -- Interpretation of the 8-Hour Primary and Secondary National Ambient Air Quality Standards for Ozone.

(k) Appendix J -- Reference Method for the Determination of Particulate Matter as PM₁₀ in the Atmosphere.

(l) Appendix K -- Interpretation of the National Ambient Air Quality Standards for Particulate Matter.

(m) Appendix L -- Reference Method for the Determination of Fine Particulate Matter as PM_2.5 in the Atmosphere.

(n) Appendix M -- Reserved.

(o) Appendix N -- Interpretation of the National Ambient Air Quality Standards for PM_2.5.

(p) Appendix O -- Reference Method for the Determination of Coarse Particulate Matter as PM in the Atmosphere.

(q) Appendix P -- Interpretation of the Primary and Secondary National Ambient Air Quality Standards for Ozone.

(r) Appendix Q -- Reference Method for the Determination of Lead in Suspended Particulate Matter as PM₁₀ Collected from Ambient Air.

(s) Appendix R -- Interpretation of the National Ambient Air Quality Standards for Lead.

(t) Appendix S -- Interpretation of the Primary National Ambient Air Quality Standards for Oxides of Nitrogen (Nitrogen Dioxide).

(u) Appendix T -- Interpretation of the Primary National Ambient Air Quality Standards for Oxides of Sulfur (Sulfur Dioxide).

(v) Appendix U -- Interpretation of the Primary and Secondary National Ambient Air Quality Standards for Ozone.

(2) 40 CFR Part 51 -- Requirements for Preparation, Adoption, and Submittal of Implementation Plans.

(a) Appendix M -- Recommended Test Methods for State Implementation Plans.

(b) Appendix S -- Emission Offset Interpretive Ruling.

(c) Appendix W -- Guideline on Air Quality Models (Revised).

(d) Appendix Y -- Guidelines for BART Determinations Under the Regional Haze Rule.

(3) 40 CFR Part 55 -- Outer Continental Shelf Air Regulations, except for §§ 55.5, 55.11, and 55.12.

(4) 40 CFR Part 58 -- Ambient Air Quality Surveillance.

Appendix A -- Quality Assurance Requirements for SLAMS, SPMs and PSD Air Monitoring.

(5) 40 CFR Part 59 -- National Volatile Organic Compound Emission Standards for Consumer and Commercial Products.

(a) Subpart C -- National Volatile Organic Compound Emission Standards for Consumer Products.

(b) Subpart D -- National Volatile Organic Compound Emission Standards for Architectural Coatings, Appendix A -- Determination of Volatile Matter Content of Methacrylate Multicomponent Coatings Used as Traffic Marking Coatings.

(6) 40 CFR Part 60 -- Standards of Performance for New Stationary Sources.

The specific provisions of 40 CFR Part 60 incorporated by reference are found in Article 5 (9VAC5-50-400 et seq.) of Part II of 9VAC5-50 (New and Modified Stationary Sources).

(7) 40 CFR Part 61 -- National Emission Standards for Hazardous Air Pollutants.

The specific provisions of 40 CFR Part 61 incorporated by reference are found in Article 1 (9VAC5-60-60 et seq.) of Part II of 9VAC5-60 (Hazardous Air Pollutant Sources).

(8) 40 CFR Part 63 -- National Emission Standards for Hazardous Air Pollutants for Source Categories.

The specific provisions of 40 CFR Part 63 incorporated by reference are found in Article 2 (9VAC5-60-90 et seq.) of Part II of 9VAC5-60 (Hazardous Air Pollutant Sources).

(9) 40 CFR Part 64 -- Compliance Assurance Monitoring.

(10) 40 CFR Part 72 -- Permits Regulation.

(11) 40 CFR Part 73 -- Sulfur Dioxide Allowance System.

(12) 40 CFR Part 74 -- Sulfur Dioxide Opt-Ins.

(13) 40 CFR Part 75 -- Continuous Emission Monitoring.

(14) 40 CFR Part 76 -- Acid Rain Nitrogen Oxides Emission Reduction Program.

(15) 40 CFR Part 77 -- Excess Emissions.

(16) 40 CFR Part 78 -- Appeal Procedures for Acid Rain Program.

(17) 40 CFR Part 81 -- Designation of Areas for Air Quality Planning Purposes.

(18) 40 CFR Part 82 -- Protection of Stratospheric Ozone.

(19) 40 CFR Part 152 Subpart I -- Classification of Pesticides.

(18) (20) 49 CFR Part 172 -- Hazardous Materials Table. Special Provisions, Hazardous Materials Communications, Emergency Response Information, and Training Requirements, Subpart E, Labeling.

(19) (21) 29 CFR Part 1926 Subpart F -- Fire Protection and Prevention.

b. Copies may be obtained from Superintendent of Documents, P.O. Box 371954, Pittsburgh, PA 15250-7954; telephone (202) 783-3238.

2. U.S. Environmental Protection Agency.

a. The following documents from the U.S. Environmental Protection Agency are incorporated herein by reference:

(1) Reich Test, Atmospheric Emissions from Sulfuric Acid Manufacturing Processes, Public Health Service Publication No. PB82250721, 1980.

(2) Compilation of Air Pollutant Emission Factors (AP-42). Volume I: Stationary and Area Sources, stock number 055-000-00500-1, 1995; Supplement A, stock number 055-000-00551-6, 1996; Supplement B, stock number 055-000-00565, 1997; Supplement C, stock number 055-000-00587-7, 1997; Supplement D, 1998; Supplement E, 1999.

(3) "Guidelines for Determining Capture Efficiency" (GD-35), Emissions Monitoring and Analysis Division, Office of Air Quality Planning and Standards, January 9, 1995.

b. Copies of the document identified in subdivision E 2 a (1) of this section, and Volume I and Supplements A through C of the document identified in subdivision E 2 a (2) of this section, may be obtained from U.S. Department of Commerce, National Technical Information Service, 5285 Port Royal Road, Springfield, VA 22161; telephone 1-800-553-6847. Copies of Supplements D and E of the document identified in subdivision E 2 a (2) of this section may be obtained online from EPA's Technology Transfer Network at http://www.epa.gov/ttn/index.html. Copies of the document identified in subdivision E 2 a (3) of this section are only available online from EPA's Technology Transfer Network at http://www.epa.gov/ttn/emc/guidlnd.html.

3. United States government.

a. The following document from the United States government is incorporated herein by reference: Standard Industrial Classification Manual, 1987 (U.S. Government Printing Office stock number 041-001-00-314-2).

b. Copies may be obtained from Superintendent of Documents, P.O. Box 371954, Pittsburgh, PA 15250-7954; telephone (202) 512-1800.

4. American Society for Testing and Materials (ASTM).

a. The documents specified below from the American Society for Testing and Materials are incorporated herein by reference.

(1) D323-99a, "Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method)."

(2) D97-96a, "Standard Test Method for Pour Point of Petroleum Products."

(3) D129-00, "Standard Test Method for Sulfur in Petroleum Products (General Bomb Method)."

(4) D388-99, "Standard Classification of Coals by Rank."

(5) D396-98, "Standard Specification for Fuel Oils."

(6) D975-98b, "Standard Specification for Diesel Fuel Oils."

(7) D1072-90(1999), "Standard Test Method for Total Sulfur in Fuel Gases."

(8) D1265-97, "Standard Practice for Sampling Liquefied Petroleum (LP) Gases (Manual Method)."

(9) D2622-98, "Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-Ray Fluorescence Spectrometry."

(10) D4057-95(2000), "Standard Practice for Manual Sampling of Petroleum and Petroleum Products."

(11) D4294-98, "Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy-Dispersive X-Ray Fluorescence Spectroscopy."

(12) D523-89, "Standard Test Method for Specular Gloss" (1999).

(13) D1613-02, "Standard Test Method for Acidity in Volatile Solvents and Chemical Intermediates Used in Paint, Varnish, Lacquer and Related Products" (2002).

(14) D1640-95, "Standard Test Methods for Drying, Curing, or Film Formation of Organic Coatings at Room Temperature" (1999).

(15) E119-00a, "Standard Test Methods for Fire Tests of Building Construction Materials" (2000).

(16) E84-01, "Standard Test Method for Surface Burning Characteristics of Building Construction Materials" (2001).

(17) D4214-98, "Standard Test Methods for Evaluating the Degree of Chalking of Exterior Paint Films" (1998).

(18) D86-04b, "Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure" (2004).

(19) D4359-90, "Standard Test Method for Determining Whether a Material is a Liquid or a Solid" (reapproved 2000).

(20) E260-96, "Standard Practice for Packed Column Gas Chromatography" (reapproved 2001).

(21) D3912-95, "Standard Test Method for Chemical Resistance of Coatings Used in Light-Water Nuclear Power Plants" (reapproved 2001).

(22) D4082-02, "Standard Test Method for Effects of Gamma Radiation on Coatings for Use in Light-Water Nuclear Power Plants."

(23) F852-99, "Standard Specification for Portable Gasoline Containers for Consumer Use" (reapproved 2006).

(24) F976-02, "Standard Specification for Portable Kerosine and Diesel Containers for Consumer Use."

(25) D4457-02, "Standard Test Method for Determination of Dichloromethane and 1,1,1-Trichloroethane in Paints and Coatings by Direct Injection into a Gas Chromatograph" (reapproved 2008).

(26) D3792-05, "Standard Test Method for Water Content of Coatings by Direct Injection Into a Gas Chromatograph."

(27) D2879-97, "Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope" (reapproved 2007).

b. Copies may be obtained from American Society for Testing Materials, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959; telephone (610) 832-9585.

5. American Petroleum Institute (API).

a. The following document from the American Petroleum Institute is incorporated herein by reference: Evaporative Loss from Floating Roof Tanks, API MPMS Chapter 19, April 1, 1997.

b. Copies may be obtained from American Petroleum Institute, 1220 L Street, Northwest, Washington, DC 20005; telephone (202) 682-8000.

6. American Conference of Governmental Industrial Hygienists (ACGIH).

a. The following document from the ACGIH is incorporated herein by reference: 1991-1992 Threshold Limit Values for Chemical Substances and Physical Agents and Biological Exposure Indices (ACGIH Handbook).

b. Copies may be obtained from ACGIH, 1330 Kemper Meadow Drive, Suite 600, Cincinnati, OH 45240; telephone (513) 742-2020.

7. National Fire Prevention Association (NFPA).

a. The documents specified below from the National Fire Prevention Association are incorporated herein by reference.

(1) NFPA 385, Standard for Tank Vehicles for Flammable and Combustible Liquids, 2000 Edition.

(2) NFPA 30, Flammable and Combustible Liquids Code, 2000 Edition.

(3) NFPA 30A, Code for Motor Fuel Dispensing Facilities and Repair Garages, 2000 Edition.

b. Copies may be obtained from the National Fire Prevention Association, One Batterymarch Park, P.O. Box 9101, Quincy, MA 02269-9101; telephone (617) 770-3000.

8. American Society of Mechanical Engineers (ASME).

a. The documents specified below from the American Society of Mechanical Engineers are incorporated herein by reference.

(1) ASME Power Test Codes: Test Code for Steam Generating Units, Power Test Code 4.1-1964 (R1991).

(2) ASME Interim Supplement 19.5 on Instruments and Apparatus: Application, Part II of Fluid Meters, 6th edition (1971).

(3) Standard for the Qualification and Certification of Resource Recovery Facility Operators, ASME QRO-1-1994.

b. Copies may be obtained from the American Society of Mechanical Engineers, Three Park Avenue, New York, NY 10016; telephone (800) 843-2763.

9. American Hospital Association (AHA).

a. The following document from the American Hospital Association is incorporated herein by reference: An Ounce of Prevention: Waste Reduction Strategies for Health Care Facilities, AHA Catalog no. W5-057007, 1993.

b. Copies may be obtained from American Hospital Association, One North Franklin, Chicago, IL 60606; telephone (800) 242-2626.

10. Bay Area Air Quality Management District (BAAQMD).

a. The following documents from the Bay Area Air Quality Management District are incorporated herein by reference:

(1) Method 41, "Determination of Volatile Organic Compounds in Solvent-Based Coatings and Related Materials Containing Parachlorobenzotrifluoride" (December 20, 1995).

(2) Method 43, "Determination of Volatile Methylsiloxanes in Solvent-Based Coatings, Inks, and Related Materials" (November 6, 1996).

b. Copies may be obtained from Bay Area Air Quality Management District, 939 Ellis Street, San Francisco, CA 94109, telephone (415) 771-6000.

11. South Coast Air Quality Management District (SCAQMD).

a. The following documents from the South Coast Air Quality Management District are incorporated herein by reference:

(1) Method 303-91, "Determination of Exempt Compounds," in Manual SSMLLABM, "Laboratory Methods of Analysis for Enforcement Samples" (1996).

(2) Method 318-95, "Determination of Weight Percent Elemental Metal in Coatings by X-Ray Diffraction," in Manual SSMLLABM, "Laboratory Methods of Analysis for Enforcement Samples" (1996).

(3) Rule 1174 Ignition Method Compliance Certification Protocol (February 28, 1991).

(4) Method 304-91, "Determination of Volatile Organic Compounds (VOC) in Various Materials," in Manual SSMLLABM, "Laboratory Methods of Analysis for Enforcement Samples" (1996).

(5) Method 316A-92, "Determination of Volatile Organic Compounds (VOC) in Materials Used for Pipes and Fittings" in Manual SSMLLABM, "Laboratory Methods of Analysis for Enforcement Samples" (1996).

(6) "General Test Method for Determining Solvent Losses from Spray Gun Cleaning Systems," October 3, 1989.

b. Copies may be obtained from South Coast Air Quality Management District, 21865 E. Copley Drive, Diamond Bar, CA 91765, telephone (909) 396-2000.

12. California Air Resources Board (CARB).

a. The following documents from the California Air Resources Board are incorporated herein by reference:

(1) Test Method 510, "Automatic Shut-Off Test Procedure for Spill-Proof Systems and Spill-Proof Spouts" (July 6, 2000).

(2) Test Method 511, "Automatic Closure Test Procedure for Spill-Proof Systems and Spill-Proof Spouts" (July 6, 2000).

(3) Method 100, "Procedures for Continuous Gaseous Emission Stack Sampling" (July 28, 1997).

(4) Test Method 513, "Determination of Permeation Rate for Spill-Proof Systems" (July 6, 2000).

(5) Method 310, "Determination of Volatile Organic Compounds (VOC) in Consumer Products and Reactive Organic Compounds in Aerosol Coating Products (Including Appendices A and B)" (May 5, 2005).

(6) California Code of Regulations, Title 17, Division 3, Chapter 1, Subchapter 8.5, Article 1, § 94503.5 (2003).

(7) California Code of Regulations, Title 17, Division 3, Chapter 1, Subchapter 8.5, Article 2, §§ 94509 and 94511 (2003).

(8) California Code of Regulations, Title 17, Division 3, Chapter 1, Subchapter 8.5, Article 4, §§ 94540-94555 (2003).

(9) "Certification Procedure 501 for Portable Fuel Containers and Spill-Proof Spouts, CP-501" (July 26, 2006).

(10) "Test Procedure for Determining Integrity of Spill-Proof Spouts and Spill-Proof Systems, TP-501" (July 26, 2006).

(11) "Test Procedure for Determining Diurnal Emissions from Portable Fuel Containers, TP-502" (July 26, 2006).

b. Copies may be obtained from California Air Resources Board, P.O. Box 2815, Sacramento, CA 95812, telephone (906) 322-3260 or (906) 322-2990.

13. American Architectural Manufacturers Association.

a. The following documents from the American Architectural Manufacturers Association are incorporated herein by reference:

(1) Voluntary Specification 2604-02, "Performance Requirements and Test Procedures for High Performance Organic Coatings on Aluminum Extrusions and Panels" (2002).

(2) Voluntary Specification 2605-02, "Performance Requirements and Test Procedures for Superior Performing Organic Coatings on Aluminum Extrusions and Panels" (2002).

b. Copies may be obtained from American Architectural Manufacturers Association, 1827 Walden Office Square, Suite 550, Schaumburg, IL 60173, telephone (847) 303-5664.

14. American Furniture Manufacturers Association.

a. The following document from the American Furniture Manufacturers Association is incorporated herein by reference: Joint Industry Fabrics Standards Committee, Woven and Knit Residential Upholstery Fabric Standards and Guidelines (January 2001).

b. Copies may be obtained from American Furniture Manufacturers Association, P.O. Box HP-7, High Point, NC 27261; telephone (336) 884-5000.

15. Petroleum Equipment Institute.

a. The following document from the Petroleum Equipment Institute is incorporated herein by reference: Recommended Practices for Installation and Testing of Vapor-Recovery Systems at Vehicle-Fueling Sites, PEI/RP300-09 (2009).

b. Copies may be obtained from Petroleum Equipment Institute, 6931 S. 66th E. Avenue, Suite 310, Tulsa, OK 74133; telephone (918) 494-9696; www.pei.org.

16. American Architectural Manufacturers Association (AAMA).

a. The following documents from the American Architectural Manufacturers Association are incorporated herein by reference:

(1) Voluntary Specification, Performance Requirements and Test Procedures for High Performance Organic Coatings on Aluminum Extrusions and Panels, publication number AAMA 2604-05.

(2) Voluntary Specification, Performance Requirements and Test Procedures for Superior Performing Organic Coatings on Aluminum Extrusions and Panels, publication number AAMA 2605-05.

b. Copies may be obtained from American Architectural Manufacturers Association, 1827 Walden Office Square, Suite 550, Schaumburg, IL 60173-4268; telephone (847) 303-5774.

The U.S. Environmental Protection Agency Regulations on Standards of Performance for New Stationary Sources (NSPSs), as promulgated in 40 CFR Part 60 and designated in 9VAC5-50-410 are, unless indicated otherwise, incorporated by reference into the regulations of the board as amended by the word or phrase substitutions given in 9VAC5-50-420. The complete text of the subparts in 9VAC5-50-410 incorporated in this regulation by reference is contained in 40 CFR Part 60. The 40 CFR section numbers appearing under each subpart in 9VAC5-50-410 identify the specific provisions of the subpart incorporated by reference. The specific version of the provision adopted by reference shall be that contained in the CFR (2020) (2022) in effect July 1, 2020 2022. In making reference to the Code of Federal Regulations, 40 CFR Part 60 means Part 60 of Title 40 of the Code of Federal Regulations; 40 CFR 60.1 means 60.1 in Part 60 of Title 40 of the Code of Federal Regulations.

The Environmental Protection Agency (EPA) Regulations on National Emission Standards for Hazardous Air Pollutants (NESHAP), as promulgated in 40 CFR Part 61 and designated in 9VAC5-60-70 are, unless indicated otherwise, incorporated by reference into the regulations of the board as amended by the word or phrase substitutions given in 9VAC5-60-80. The complete text of the subparts in 9VAC5-60-70 incorporated in this regulation by reference is contained in 40 CFR Part 61. The 40 CFR section numbers appearing under each subpart in 9VAC5-60-70 identify the specific provisions of the subpart incorporated by reference. The specific version of the provision adopted by reference shall be that contained in the CFR (2020) (2022) in effect July 1, 2020 2022. In making reference to the Code of Federal Regulations, 40 CFR Part 61 means Part 61 of Title 40 of the Code of Federal Regulations; 40 CFR 61.01 means 61.01 in Part 61 of Title 40 of the Code of Federal Regulations.

The Environmental Protection Agency (EPA) National Emission Standards for Hazardous Air Pollutants for Source Categories (Maximum Achievable Control Technologies, or MACTs) as promulgated in 40 CFR Part 63 and designated in 9VAC5-60-100 are, unless indicated otherwise, incorporated by reference into the regulations of the board as amended by the word or phrase substitutions given in 9VAC5-60-110. The complete text of the subparts in 9VAC5-60-100 incorporated in this regulation by reference is contained in 40 CFR Part 63. The 40 CFR section numbers appearing under each subpart in 9VAC5-60-100 identify the specific provisions of the subpart incorporated by reference. The specific version of the provision adopted by reference shall be that contained in the CFR (2020) (2022) in effect July 1, 2020 2022. In making reference to the Code of Federal Regulations, 40 CFR Part 63 means Part 63 of Title 40 of the Code of Federal Regulations; 40 CFR 63.1 means 63.1 in Part 63 of Title 40 of the Code of Federal Regulations.

Subpart A - General Provisions.

40 CFR 63.1 through 40 CFR 63.11; 40 CFR 63.16

(applicability, definitions, units and abbreviations, prohibited activities and circumvention, construction and reconstruction, compliance with standards and maintenance requirements, performance testing requirements, monitoring requirements, notification requirements, recordkeeping and reporting requirements, control device requirements, performance track provisions)

Subpart B - Not applicable.

Subpart C - List of Hazardous Air Pollutants, Petitions Process, Lesser Quantity Designations, Source Category List.

40 CFR 63.60, 40 CFR 63.61, 40 CFR 63.62 and, 40 CFR 63.63, and 40 CFR 63.64

(deletion of caprolactam from the list of hazardous air pollutants, deletion of methyl ethyl ketone from the list of hazardous air pollutants, redefinition of glycol ethers listed as hazardous air pollutants, deletion of ethylene glycol monobutyl ether from the list of hazardous air pollutants, addition of 1-bromopropane (1-BP) to the list of hazardous air pollutants)

Subpart D - Not applicable.

Subpart E - Not applicable.

Subpart F - Organic Hazardous Air Pollutants from the Synthetic Organic Chemical Manufacturing Industry.

40 CFR 63.100 through 40 CFR 63.106

(chemical manufacturing process units that manufacture as a primary product one or more of a listed chemical; use as a reactant or manufacture as a product, by-product, or co-product, one or more of a listed organic hazardous air pollutant; and are located at a plant site that is a major source as defined in § 112 of the federal Clean Air Act)

Subpart G - Organic Hazardous Air Pollutants from the Synthetic Organic Chemical Manufacturing Industry for Process Vents, Storage Vessels, Transfer Operations, and Wastewater.

40 CFR 63.110 through 40 CFR 63.152

(all process vents, storage vessels, transfer operations, and wastewater streams within a source subject to Subpart F, 40 CFR 63.100 through 40 CFR 63.106)

Subpart H - Organic Hazardous Air Pollutants for Equipment Leaks.

40 CFR 63.160 through 40 CFR 63.182

(pumps, compressors, agitators, pressure relief devices, sampling connection systems, open-ended valves or lines, valves, connectors, surge control vessels, bottoms receivers, instrumentation systems, and control devices or systems that are intended to operate in organic hazardous air pollutant service 300 hours or more during the calendar year within a source subject to the provisions of a specific subpart in 40 CFR Part 63)

Subpart I - Organic Hazardous Air Pollutants for Certain Processes Subject to the Negotiated Regulation for Equipment Leaks.

40 CFR 63.190 through 40 CFR 63.192

(emissions of designated organic hazardous air pollutants from processes specified in this subpart that are located at a plant site that is a major source as defined in § 112 of the federal Clean Air Act)

Subpart J - Polyvinyl Chloride and Copolymers Production.

40 CFR 63.210 through 40 CFR 63.217

(NOTE: Authority to enforce the above standard is being retained by EPA and it is not incorporated by reference into these regulations.)

Subpart K - Reserved.

Subpart L - Coke Oven Batteries.

40 CFR 63.300 through 40 CFR 63.313

(existing by-product coke oven batteries at a coke plant, and existing nonrecovery coke oven batteries located at a coke plant)

Subpart M - Perchlorethylene Dry Cleaning Facilities.

40 CFR 63.320 through 40 CFR 63.325

(each dry cleaning facility that uses perchlorethylene)

Subpart N - Chromium Emissions from Hard and Decorative Chromium Electroplating and Chromium Anodizing Tanks.

40 CFR 63.340 through 40 CFR 63.347

(each chromium electroplating or chromium anodizing tank at facilities performing hard chromium electroplating, decorative chromium electroplating, or chromium anodizing)

Subpart O - Ethylene Oxide Commercial Sterilization and Fumigation Operations.

40 CFR 63.360 through 40 CFR 63.367

(sterilization sources using ethylene oxide in sterilization or fumigation operations)

Subpart P - Reserved.

Subpart Q - Industrial Process Cooling Towers.

40 CFR 63.400 through 40 CFR 63.406

(industrial process cooling towers that are operated with chromium-based water treatment chemicals)

Subpart R - Gasoline Distribution Facilities.

40 CFR 63.420 through 40 CFR 63.429

(bulk gasoline terminals and pipeline breakout stations)

Subpart S - Pulp and Paper Industry.

40 CFR 63.440 through 40 CFR 63.458

(processes that produce pulp, paper, or paperboard, and use the following processes and materials: kraft, soda, sulfite, or semi-chemical pulping processes using wood; or mechanical pulping processes using wood; or any process using secondary or nonwood fibers)

Subpart T - Halogenated Solvent Cleaning.

40 CFR 63.460 through 40 CFR 63.469

(each individual batch vapor, in-line vapor, in-line cold, and batch cold solvent cleaning machine that uses any solvent containing methylene chloride, perchlorethylene, trichloroethylene, 1,1,1-trichloroethane, carbon tetrachloride, or chloroform)

Subpart U - Group I Polymers and Resins.

40 CFR 63.480 through 40 CFR 63.506

(elastomer product process units that produce butyl rubber, halobutyl rubber, epichlorohydrin elastomers, ethylene propylene rubber, Hypalon™, neoprene, nitrile butadiene rubber, nitrile butadiene latex, polysulfide rubber, polybutadiene rubber/styrene butadiene rubber by solution, styrene butadiene latex, and styrene butadiene rubber by emulsion)

Subpart V - Reserved.

Subpart W - Epoxy Resins Production and Non-Nylon Polyamides Production.

40 CFR 63.520 through 40 CFR 63.527

(manufacturers of basic liquid epoxy resins and wet strength resins)

Subpart X - Secondary Lead Smelting.

40 CFR 63.541 through 40 CFR 60.552

(at all secondary lead smelters: blast, reverberatory, rotary, and electric smelting furnaces; refining kettles; agglomerating furnaces; dryers; process fugitive sources; and fugitive dust sources)

Subpart Y - Marine Tank Vessel Tank Loading Operations.

40 CFR 63.560 through 40 CFR 63.567

(marine tank vessel unloading operations at petroleum refineries)

Subpart Z - Reserved.

Subpart AA - Phosphoric Acid Manufacturing Plants.

40 CFR 63.600 through 40 CFR 63.611

(wet-process phosphoric acid process lines, evaporative cooling towers, rock dryers, rock calciners, superphosphoric acid process lines, purified acid process lines)

Subpart BB - Phosphate Fertilizers Production Plants.

40 CFR 63.620 through 40 CFR 63.632

(diammonium and monoammonium phosphate process lines, granular triple superphosphate process lines, and granular triple superphosphate storage buildings)

Subpart CC - Petroleum Refineries.

40 CFR 63.640 through 40 CFR 63.671

(storage tanks, equipment leaks, process vents, and wastewater collection and treatment systems at petroleum refineries)

Subpart DD - Off-Site Waste and Recovery Operations.

40 CFR 63.680 through 40 CFR 63.697

(operations that treat, store, recycle, and dispose of waste received from other operations that produce waste or recoverable materials as part of their manufacturing processes)

Subpart EE - Magnetic Tape Manufacturing Operations.

40 CFR 63.701 through 40 CFR 63.708

(manufacturers of magnetic tape)

Subpart FF - Reserved.

Subpart GG - Aerospace Manufacturing and Rework Facilities.

40 CFR 63.741 through 40 CFR 63.759

(facilities engaged in the manufacture or rework of commercial, civil, or military aerospace vehicles or components)

Subpart HH - Oil and Natural Gas Production Facilities.

40 CFR 63.760 through 40 CFR 63.779

(facilities that process, upgrade, or store hydrocarbon liquids or natural gas; ancillary equipment and compressors intended to operate in volatile hazardous air pollutant service)

Subpart II - Shipbuilding and Ship Repair (Surface Coating).

40 CFR 63.780 through 40 CFR 63.788

(shipbuilding and ship repair operations)

Subpart JJ - Wood Furniture Manufacturing Operations.

40 CFR 63.800 through 40 CFR 63.819

(finishing materials, adhesives, and strippable spray booth coatings; storage, transfer, and application of coatings and solvents)

Subpart KK - Printing and Publishing Industry.

40 CFR 63.820 through 40 CFR 63.831

(publication rotogravure, product and packaging rotogravure, and wide-web printing processes)

Subpart LL - Primary Aluminum Reduction Plants.

40 CFR 63.840 through 40 CFR 63.859

(each pitch storage tank, potline, paste production plant, or anode bulk furnace associated with primary aluminum production)

Subpart MM - Chemical Recovery Combustion Sources at Kraft, Soda, Sulfite and Stand-Alone Semichemical Pulp Mills.

40 CFR 63.860 through 40 CFR 63.868

(chemical recovery systems, direct and nondirect contact evaporator recovery furnace systems, lime kilns, sulfite combustion units, semichemical combustion units)

Subpart NN - Wool Fiberglass Manufacturing at Area Sources.

40 CFR 63.880 through 40 CFR 63.899

(manufacture of wool fiberglass insulation materials composed of glass fibers made from glass produced or melted at the same facility where the manufacturing line is located)

Subpart OO - Tanks--Level 1.

40 CFR 63.900 through 40 CFR 63.907

(for off-site waste and recovery operations, fixed-roof tanks)

Subpart PP - Containers.

40 CFR 63.920 through 40 CFR 63.928

(for off-site waste and recovery operations, containers)

Subpart QQ - Surface Impoundments.

40 CFR 63.940 through 40 CFR 63.948

(for off-site waste and recovery operations, surface impoundment covers and vents)

Subpart RR - Individual Drain Systems.

40 CFR 63.960 through 40 CFR 63.966

(for off-site waste and recovery operations, inspection and maintenance of individual drain systems)

Subpart SS - Closed Vent Systems, Control Devices, Recovery Devices and Routing to a Fuel Gas System or a Process.

40 CFR 63.980 through 40 CFR 63.999

(closed vent systems, control devices, recovery devices, and routing to a fuel gas system or a process, when associated with facilities subject to a referencing subpart)

Subpart TT - Equipment Leaks - Control Level 1.

40 CFR 63.1000 through 40 CFR 63.1018

(control of air emissions from equipment leaks when associated with facilities subject to a referencing subpart)

Subpart UU - Equipment Leaks - Control Level 2.

40 CFR 63.1019 through 40 CFR 63.1039

(control of air emissions from equipment leaks when associated with facilities subject to a referencing subpart: pumps, compressors, agitators, pressure relief devices, sampling connection systems, open-ended valves or lines, valves, connectors, instrumentation systems, closed vent systems and control devices)

Subpart VV - Oil-Water Separators and Organic-Water Separators.

40 CFR 63.1040 through 40 CFR 63.1049

(for off-site waste and recovery operations, oil-water separators and organic-water separator roofs and vents)

Subpart WW - Storage Vessels (Tanks) - Control Level 2.

40 CFR 63.1060 through 40 CFR 63.1066

(storage vessels associated with facilities subject to a referencing subpart)

Subpart XX - Ethylene Manufacturing Process Units: Heat Exchange Systems and Waste.

40 CFR 63.1080 through 40 CFR 63.1098

(any cooling tower system or once-through cooling water system)

Subpart YY - Generic Maximum Achievable Control Technology Standards.

40 CFR 63.1100 through 40 CFR 63.1113

(acetal resins production, acrylic and modacrylic fibers production, hydrogen fluoride production, polycarbonate production)

Subpart ZZ - Reserved.

Subpart AAA - Reserved.

Subpart BBB - Reserved.

Subpart CCC - Steel Pickling - Hydrogen Chloride Process Facilities and Hydrochloric Acid Regeneration Plants.

40 CFR 63.1155 through 40 CFR 63.1174

(steel pickling facilities that pickle carbon steel using hydrochloric acid solution, hydrochloric acid regeneration plants)

Subpart DDD - Mineral Wool Production.

40 CFR 63.1175 through 40 CFR 63.1199

(cupolas and curing ovens at mineral wool manufacturing facilities)

Subpart EEE - Hazardous Waste Combustors.

40 CFR 63.1200 through 40 CFR 63.1221

(hazardous waste combustors)

Subpart FFF - Reserved.

Subpart GGG - Pharmaceutical Production.

40 CFR 63.1250 through 40 CFR 63.1261

(pharmaceutical manufacturing operations)

Subpart HHH - Natural Gas Transmission and Storage Facilities.

40 CFR 63.1270 through 40 CFR 63.1289

(natural gas transmission and storage facilities that transport or store natural gas prior to entering the pipeline to a local distribution company or to a final end user)

Subpart III - Flexible Polyurethane Foam Production.

40 CFR 63.1290 through 40 CFR 63.1309

(flexible polyurethane foam or rebond processes)

Subpart JJJ - Group IV Polymers and Resins.

40 CFR 63.1310 through 40 CFR 63.1335

(facilities which manufacture acrylonitrile butadiene styrene resin, styrene acrylonitrile resin, methyl methacrylate butadiene styrene resin, polystyrene resin, poly(ethylene terephthalate) resin, or nitrile resin)

Subpart KKK - Reserved.

Subpart LLL - Portland Cement Manufacturing.

40 CFR 63.1340 through 40 CFR 63.1359

(kilns; in-line kilns/raw mills; clinker coolers; raw mills; finish mills; raw material dryers; raw material, clinker, or finished product storage bins; conveying system transfer points; bagging systems; bulk loading or unloading systems)

Subpart MMM - Pesticide Active Ingredient Production.

40 CFR 63.1360 through 40 CFR 63.1369

(pesticide active ingredient manufacturing process units, waste management units, heat exchange systems, and cooling towers)

Subpart NNN - Wool Fiberglass Manufacturing.

40 CFR 63.1380 through 40 CFR 63.1399

(glass melting furnaces, rotary spin wool fiberglass manufacturing lines producing bonded wool fiberglass building insulation or bonded heavy-density product)

Subpart OOO - Amino/Phenolic Resins Production.

40 CFR 63.1400 through 40 CFR 63.1419

(unit operations, process vents, storage vessels, equipment subject to leak provisions)

Subpart PPP - Polyether Polyols Production.

40 CFR 63.1420 through 40 CFR 63.1439

(polyether polyol manufacturing process units)

Subpart QQQ - Primary Copper Smelting.

40 CFR 63.1440 through 40 CFR 63.1-1459

(batch copper converters, including copper concentrate dryers, smelting furnaces, slag cleaning vessels, copper converter departments, and the entire group of fugitive emission sources)

Subpart RRR - Secondary Aluminum Production.

40 CFR 63.1500 through 40 CFR 63.1520

(scrap shredders; thermal chip dryers; scrap dryers/delacquering kilns/decoating kilns; group 2, sweat, dross-only furnaces; rotary dross coolers; processing units)

Subpart SSS - Reserved.

Subpart TTT - Primary Lead Smelting.

40 CFR 63.1541 through 40 CFR 63.1550

(sinter machines, blast furnaces, dross furnaces, process fugitive sources, fugitive dust sources)

Subpart UUU - Petroleum Refineries: Catalytic Cracking Units, Catalytic Reforming Units, and Sulfur Recovery Units.

40 CFR 63.1560 through 40 CFR 63.1579

(petroleum refineries that produce transportation and heating fuels or lubricants, separate petroleum, or separate, crack, react, or reform an intermediate petroleum stream, or recover byproducts from an intermediate petroleum stream)

Subpart VVV - Publicly Owned Treatment Works.

40 CFR 63.1580 through 40 CFR 63.1595

(intercepting sewers, outfall sewers, sewage collection systems, pumping, power, and other equipment)

Subpart WWW - Reserved.

Subpart XXX - Ferroalloys Production: Ferromanganese and Silicomanganese.

40 CFR 63.1620 through 40 CFR 63.1679

(submerged arc furnaces, metal oxygen refining processes, crushing and screening operations, fugitive dust sources)

Subpart YYY - Reserved.

Subpart ZZZ - Reserved.

Subpart AAAA - Municipal Solid Waste Landfills.

40 CFR 63.1930 through 40 CFR 63.1990

(municipal solid waste landfills that have accepted waste since November 8, 1987, or have additional capacity for waste deposition)

Subpart BBBB - Reserved.

Subpart CCCC - Manufacturing of Nutritional Yeast.

40 CFR 63.2130 through 40 CFR 63.2192

(fermentation vessels)

Subpart DDDD - Plywood and Composite Wood Products.

40 CFR 63.2230 through 40 CFR 63.2292

(manufacture of plywood and composite wood products by bonding wood material or agricultural fiber with resin under heat and pressure to form a structural panel or engineered wood product)

Subpart EEEE - Organic Liquids Distribution (Nongasoline).

40 CFR 63.2330 through 40 CFR 63.2406

(transfer of noncrude oil liquids or liquid mixtures that contain organic hazardous air pollutants, or crude oils downstream of the first point of custody, via storage tanks, transfer racks, equipment leak components associated with pipelines, and transport vehicles)

Subpart FFFF - Miscellaneous Organic Chemical Manufacturing.

40 CFR 63.2430 through 40 CFR 63.2550

(reaction, recovery, separation, purification, or other activity, operation, manufacture, or treatment that is used to produce a product or isolated intermediate)

Subpart GGGG - Solvent Extraction for Vegetable Oil Production.

40 CFR 63.2830 through 40 CFR 63.2872

(vegetable oil production processes)

Subpart HHHH - Wet-formed Fiberglass Mat Production.

40 CFR 63.2980 through 63.3079

(wet-formed fiberglass mat drying and curing ovens)

Subpart IIII - Surface Coating of Automobiles and Light-Duty Trucks.

40 CFR 63.3080 through 40 CFR 63.3176.

(application of topcoat to new automobile or new light-duty truck bodies or body parts)

Subpart JJJJ - Paper and Other Web Coating.

40 CFR 63.3280 through 40 CFR 63.3420

(web coating lines engaged in the coating of metal webs used in flexible packaging and in the coating of fabric substrates for use in pressure-sensitive tape and abrasive materials)

Subpart KKKK - Surface Coating of Metal Cans.

40 CFR 63.3480 through 40 CFR 63.3561

(application of coatings to a substrate using spray guns or dip tanks, including one-piece and two-piece draw and iron can body coating; sheetcoating; three-piece can body assembly coating; and end coating)

Subpart LLLL - Reserved.

Subpart MMMM - Surface Coating of Miscellaneous Metal Parts and Products.

40 CFR 63.3880 through 40 CFR 63.3981

(application of coatings to industrial, household, and consumer products)

Subpart NNNN - Surface Coating of Large Appliances.

40 CFR 63.4080 through 40 CFR 63.4181

(surface coating of a large appliance part or product, including cooking equipment; refrigerators, freezers, and refrigerated cabinets and cases; laundry equipment; dishwashers, trash compactors, and water heaters; and HVAC units, air-conditioning, air-conditioning and heating combination units, comfort furnaces, and electric heat pumps)

Subpart OOOO - Printing, Coating, and Dyeing of Fabrics and Other Textiles.

40 CFR 63.4280 through 40 CFR 63.4371

(printing, coating, slashing, dyeing, or finishing of fabric and other textiles)

Subpart PPPP - Surface Coating of Plastic Parts and Products.

40 CFR 63.4480 through 40 CFR 63.4581

(application of coating to a substrate using spray guns or dip tanks, including motor vehicle parts and accessories for automobiles, trucks, recreational vehicles; sporting and recreational goods; toys; business machines; laboratory and medical equipment; and household and other consumer products)

Subpart QQQQ - Surface Coating of Wood Building Products.

40 CFR 63.4680 through 40 CFR 63.4781

(finishing or laminating of wood building products used in the construction of a residential, commercial, or institutional building)

Subpart RRRR - Surface Coating of Metal Furniture.

40 CFR 63.4880 through 40 CFR 63.4981

(application of coatings to substrate using spray guns and dip tanks)

Subpart SSSS - Surface Coating of Metal Coil.

40 CFR 63.5080 through 40 CFR 63.5209

(organic coating to surface of metal coil, including web unwind or feed sections, work stations, curing ovens, wet sections, and quench stations)

Subpart TTTT - Leather Finishing Operations.

40 CFR 63.5280 through 40 CFR 63.5460

(multistage application of finishing materials to adjust and improve the physical and aesthetic characteristics of leather surfaces)

Subpart UUUU - Cellulose Products Manufacturing.

40 CFR 63.5480 through 40 CFR 63.5610

(cellulose food casing, rayon, cellulosic sponge, cellophane manufacturing, methyl cellulose, hydroxypropyl methyl cellulose, hydroxypropyl cellulose, hydroxyethyl cellulose, and carboxymethyl cellulose manufacturing industries)

Subpart VVVV - Boat Manufacturing.

40 CFR 63.5680 through 40 CFR 63.5779

(resin and gel coat operations, carpet and fabric adhesive operations, aluminum recreational boat surface coating operations)

Subpart WWWW - Reinforced Plastic Composites Production.

40 CFR 63.5780 through 40 CFR 63.5935

(reinforced or nonreinforced plastic composites or plastic molding compounds using thermostat resins and gel coats that contain styrene)

Subpart XXXX - Rubber Tire Manufacturing.

40 CFR 63.5980 through 40 CFR 63.6015

(production of rubber tires and components including rubber compounds, sidewalls, tread, tire beads, tire cord and liners)

Subpart YYYY - Stationary Combustion Turbines.

40 CFR 63.6080 through 40 CFR 63.6175

(simple cycle, regenerative/recuperative cycle, cogeneration cycle, and combined cycle stationary combustion turbines)

Subpart ZZZZ - Stationary Reciprocating Internal Combustion Engines.

40 CFR 63.6580 through 40 CFR 63.6675.

(any stationary internal combustion engine that uses reciprocating motion to convert heat energy into mechanical work)

(NOTE: Authority to enforce provisions related to affected facilities located at a major source as defined in 40 CFR 63.6675 is being retained by the Commonwealth. Authority to enforce the area source provisions of the above standard is being retained by EPA and are not incorporated by reference into these regulations for any source that is not (i) a major source as defined in 9VAC5-80-60 and subject to Article 1 (9VAC5-80-50 et seq., Federal Operating Permits for Stationary Sources) of Part II of 9VAC5-80 (Permits for Stationary Sources) or (ii) an affected source as defined in 9VAC5-80-370 and subject to Article 3 (9VAC5-80-360 et seq., Federal Operating Permits for Acid Rain Sources) of Part II of 9VAC5-80.)

Subpart AAAAA - Lime Manufacturing Plants.

40 CFR 63.7080 through 40 CFR 63.7143.

(manufacture of lime product, including calcium oxide, calcium oxide with magnesium oxide, or dead burned dolomite, by calcination of limestone, dolomite, shells or other calcareous substances)

Subpart BBBBB - Semiconductor Manufacturing.

40 CFR 63.7180 through 40 CFR 63.7195

(semiconductor manufacturing process units used to manufacture p-type and n-type semiconductors and active solid-state devices from a wafer substrate)

Subpart CCCCC - Coke Ovens: Pushing, Quenching, and Battery Stacks.

40 CFR 63.7280 through 40 CFR 63.7352

(pushing, soaking, quenching, and battery stacks at coke oven batteries)

Subpart DDDDD - Industrial, Commercial, and Institutional Boilers and Process Heaters.

40 CFR 63.7480 through 40 CFR 63.7575

(industrial, commercial, and institutional boilers and process heaters)

Subpart EEEEE - Iron and Steel Foundries.

40 CFR 63.7680 through 40 CFR 63.7765

(metal melting furnaces, scrap preheaters, pouring areas, pouring stations, automated conveyor and pallet cooling lines, automated shakeout lines, and mold and core making lines)

Subpart FFFFF - Integrated Iron and Steel Manufacturing.

40 CFR 63.7780 through 40 CFR 63.7852

(each sinter plant, blast furnace, and basic oxygen process furnace at an integrated iron and steel manufacturing facility)

Subpart GGGGG - Site Remediation.

40 CFR 63.7880 through 40 CFR 63.7957

(activities or processes used to remove, destroy, degrade, transform, immobilize, or otherwise manage remediation material)

Subpart HHHHH - Miscellaneous Coating Manufacturing.

40 CFR 63.7980 through 40 CFR 63.8105

(process vessels; storage tanks for feedstocks and products; pumps, compressors, agitators, pressure relief devices, sampling connection systems, open-ended valves or lines, valves, connectors, and instrumentation systems; wastewater tanks and transfer racks)

Subpart IIIII - Mercury Cell Chlor-Alkali Plants.

40 CFR 63.8180 through 40 CFR 63.8266

(byproduct hydrogen streams, end box ventilation system vents, and fugitive emission sources associated with cell rooms, hydrogen systems, caustic systems, and storage areas for mercury-containing wastes)

Subpart JJJJJ - Brick and Structural Clay Products Manufacturing.

40 CFR 63.8380 through 40 CFR 63.8515

(facilities that manufacture brick, clay pipe, roof tile, extruded floor and wall tile, and other extruded, dimensional clay products, and typically process raw clay and shale, form the processed materials into bricks or shapes, and dry and fire the bricks or shapes)

Subpart KKKKK - Ceramics Manufacturing.

40 CFR 63.8530 through 40 CFR 63.8665

(facilities that manufacture pressed floor tile, pressed wall tile, other pressed tile, or sanitaryware, and typically process clay, shale, and various additives, form the processed materials into tile or sanitaryware shapes, and dry and fire the ceramic products)

Subpart LLLLL - Asphalt Processing and Asphalt Roof Manufacturing.

40 CFR 63.8680 through 40 CFR 63.8698

(preparation of asphalt flux at stand-alone asphalt processing facilities, petroleum refineries, and asphalt roofing facilities)

Subpart MMMMM - Flexible Polyurethane Foam Fabrication Operations.

40 CFR 63.8780 through 40 CFR 63.8830

(flexible polyurethane foam fabrication plants using flame lamination or loop slitter adhesives)

Subpart NNNNN - Hydrochloric Acid Production.

40 CFR 63.8980 through 40 CFR 63.9075

(HCl production facilities that produce a liquid HCl product)

Subpart OOOOO - Reserved.

Subpart PPPPP - Engine Test Cells and Stands.

40 CFR Subpart 63.9280 through 40 CFR 63.9375

(any apparatus used for testing uninstalled stationary or uninstalled mobile (motive) engines)

Subpart QQQQQ - Friction Materials Manufacturing Facilities.

40 CFR 63.9480 through 40 CFR 63.9579

(friction materials manufacturing facilities that use a solvent-based process)

Subpart RRRRR - Taconite Iron Ore Processing.

40 CFR 63.9580 through 40 CFR 63.9652

(ore crushing and handling, ore dryer stacks, indurating furnace stacks, finished pellet handling, and fugitive dust)

Subpart SSSSS - Refractory Products Manufacturing.

40 CFR 63.9780 through 40 CFR 63.9824

(manufacture of refractory products, including refractory bricks and shapes, monolithics, kiln furniture, crucibles, and other materials for liming furnaces and other high temperature process units)

Subpart TTTTT - Primary Magnesium Refining.

40 CFR 63.9880 through 40 CFR 63.9942

(spray dryer, magnesium chloride storage bin scrubber, melt/reactor system, and launder off-gas system stacks)

Subpart UUUUU - Coal-fired and Oil-fired Electric Utility Steam Generating Units.

40 CFR 63.9980 through 40 CFR 63.10042

(any furnace, boiler, or other device used for combusting fuel for the purpose of producing steam, including fossil fuel-fired steam generators associated with integrated gasification combined cycle gas turbines and excluding nuclear steam generators, for the purpose of powering a generator to produce electricity or electricity and other thermal energy)

Subpart VVVVV - Reserved.

Subpart WWWWW - Hospital Ethylene Oxide Sterilizer Area Sources.

40 CFR 63.10382 through 40 CFR 63.10448

(any enclosed vessel that is filled with ethylene oxide gas or an ethylene oxide/inert gas mixture for the purpose of sterilization)

Subpart XXXXX - Reserved.

Subpart YYYYY - Electric Arc Furnace Steelmaking Facility Area Sources.

40 CFR 63.10680 through 40 CFR 63.10692

(a steel plant that produces carbon, alloy, or specialty steels using an electric arc furnace)

Subpart ZZZZZ - Iron and Steel Foundries Area Sources.

40 CFR 63.10880 through 40 CFR 63.10906

(a facility that melts scrap, ingot, and/or other forms of iron and/or steel and pours the resulting molten metal into molds to produce final or near final shape products for introduction into commerce)

Subpart AAAAAA - Reserved.

Subpart BBBBBB - Gasoline Distribution Bulk Terminals, Bulk Plants, and Pipeline Facilities, Area Sources.

40 CFR 63.11080 through 40 CFR 63.11100

(gasoline storage tanks, gasoline loading racks, vapor collection-equipped gasoline cargo tanks, and equipment components in vapor or liquid gasoline service)

Subpart CCCCCC - Gasoline Dispensing Facilities, Area Sources.

40 CFR 63.11110 through 40 CFR 63.11132

(NOTE: Authority to enforce the above standard is being retained by EPA and it is not incorporated by reference into these regulations for any source that is not (i) a major source as defined in 9VAC5-80-60 and subject to Article 1 (9VAC5-80-50 et seq., Federal Operating Permits for Stationary Sources) of Part II of 9VAC5-80 (Permits for Stationary Sources) or (ii) an affected source as defined in 9VAC5-80-370 and subject to Article 3 (9VAC5-80-360 et seq., Federal Operating Permits for Acid Rain Sources) of Part II of 9VAC5-80.)

Subpart DDDDDD - Polyvinyl Chloride and Copolymers Production Area Sources.

40 CFR 63.11140 through 40 CFR 63.11145

(plants that produce polyvinyl chloride or copolymers)

Subpart EEEEEE - Primary Copper Smelting Area Sources.

40 CFR 63.11146 through 40 CFR 63.11152

(any installation or any intermediate process engaged in the production of copper from copper sulfide ore concentrates through the use of pyrometallurgical techniques)

Subpart FFFFFF - Secondary Copper Smelting Area Sources.

40 CFR 63.11153 through 40 CFR 63.11159

(a facility that processes copper scrap in a blast furnace and converter or that uses another pyrometallurgical purification process to produce anode copper from copper scrap, including low-grade copper scrap)

Subpart GGGGGG - Primary Nonferrous Metals Area Sources--Zinc, Cadmium, and Beryllium.

40 CFR 63.11160 through 40 CFR 63.11168

(cadmium melting furnaces used to melt cadmium or produce cadmium oxide from the cadmium recovered in the zinc production; primary beryllium production facilities engaged in the chemical processing of beryllium ore to produce beryllium metal, alloy, or oxide, or performing any of the intermediate steps in these processes; and primary zinc production facilities engaged in the production, or any intermediate process in the production, of zinc or zinc oxide from zinc sulfide ore concentrates through the use of pyrometallurgical techniques)

Subpart HHHHHH - Paint Stripping and Miscellaneous Surface Coating Operations Area Sources.

40 CFR 63.11169 through 40 CFR 63.11180

(NOTE: Authority to enforce the above standard is being retained by EPA and it is not incorporated by reference into these regulations for any source that is not (i) a major source as defined in 9VAC5-80-60 and subject to Article 1 (9VAC5-80-50 et seq., Federal Operating Permits for Stationary Sources) of Part II of 9VAC5-80 (Permits for Stationary Sources) or (ii) an affected source as defined in 9VAC5-80-370 and subject to Article 3 (9VAC5-80-360 et seq., Federal Operating Permits for Acid Rain Sources) of Part II of 9VAC5-80.)

Subpart IIIIII - Reserved.

Subpart JJJJJJ - Industrial, Commercial, and Institutional Boiler Area Sources.

40 CFR 63.11193 through 40 CFR 63.11226

(NOTE: Authority to enforce the above standard is being retained by EPA and is not incorporated by reference into these regulations for any source that is not (i) a major source as defined in 9VAC5-80-60 and subject to Article 1 (9VAC5-80-50 et seq., Federal Operating Permits for Stationary Sources) of Part II of 9VAC5-80 (Permits for Stationary Sources) or (ii) an affected source as defined in 9VAC5-80-370 and subject to Article 3 (9VAC5-80-360 et seq., Federal Operating Permits for Acid Rain Sources) of Part II of 9VAC5-80.)

Subpart KKKKKK - Reserved.

Subpart LLLLLL - Acrylic and Modacrylic Fibers Production Area Sources.

40 CFR 63.11393 through 40 CFR 63.11399

(production of either of the following synthetic fibers composed of acrylonitrile units: acrylic fiber or modacrylic fiber)

Subpart MMMMMM - Carbon Black Production Area Sources.

40 CFR 63.11400 through 40 CFR 63.11406

(carbon black production process units including all waste management units, maintenance wastewater, and equipment components that contain or contact HAP that are associated with the carbon black production process unit)

Subpart NNNNNN - Chemical Manufacturing Area Sources: Chromium Compounds.

40 CFR 63.11407 through 40 CFR 63.11413

(any process that uses chromite ore as the basic feedstock to manufacture chromium compounds, primarily sodium dichromate, chromic acid, and chromic oxide)

Subpart OOOOOO - Flexible Polyurethane Foam Production and Fabrication Area Sources.

40 CFR 63.11414 through 40 CFR 63.11420

(a facility where pieces of flexible polyurethane foam are cut, bonded, and/or laminated together or to other substrates)

Subpart PPPPPP - Lead Acid Battery Manufacturing Area Sources.

40 CFR 63.11421 through 40 CFR 63.11427

(grid casting facilities, paste mixing facilities, three-process operation facilities, lead oxide manufacturing facilities, lead reclamation facilities, and any other lead-emitting operation that is associated with the lead acid battery manufacturing plant)

Subpart QQQQQQ - Wood Preserving Area Sources.

40 CFR 63.11428 through 40 CFR 63.11434

(pressure or thermal impregnation of chemicals into wood to provide effective long-term resistance to attack by fungi, bacteria, insects, and marine borers)

Subpart RRRRRR - Clay Ceramics Manufacturing Area Sources.

40 CFR 63.11435 through 40 CFR 63.11447

(manufacture of pressed tile, sanitaryware, dinnerware, or pottery with an atomized glaze spray booth or kiln that fires glazed ceramic ware)

Subpart SSSSSS - Glass Manufacturing Area Sources.

40 CFR 63.11448 through 40 CFR 63.11461

(manufacture of flat glass, glass containers, or pressed and blown glass by melting a mixture of raw materials to produce molten glass and form the molten glass into sheets, containers, or other shapes)

Subpart TTTTTT - Secondary Nonferrous Metals Processing Area Sources.

40 CFR 63.11462 through 40 CFR 63.11474

(all crushing and screening operations at a secondary zinc processing facility and all furnace melting operations located at any secondary nonferrous metals processing facility)

Subpart UUUUUU - Reserved.

Subpart VVVVVV - Chemical Manufacturing Area Sources.

40 CFR 63.11494 through 40 CFR 11503

(each chemical manufacturing process unit that uses as feedstocks, generates as byproducts, or produces as products any of the following: 1,3-butadiene; 1,3-dichloropropene; acetaldehyde; chloroform; ethylene dichloride; methylene chloride; hexachlorobenzene; hydrazine; quinoline; or compounds of arsenic, cadmium, chromium, lead, manganese, or nickel)

Subpart WWWWWW - Plating and Polishing Operations, Area Sources.

40 CFR 63.11504 through 40 CFR 63.11513

(new and existing tanks, thermal spraying equipment, and mechanical polishing equipment used in non-chromium electroplating, electroless or non-electrolytic plating, non-electrolytic metal coating, dry mechanical polishing, electroforming, and electropolishing)

Subpart XXXXXX - Nine Metal Fabrication and Finishing Source Categories, Area Sources.

40 CFR 63.11514 through 40 CFR 63.11523

(NOTE: Authority to enforce the above standard is being retained by EPA and it is not incorporated by reference into these regulations for any source that is not (i) a major source as defined in 9VAC5-80-60 and subject to Article 1 (9VAC5-80-50 et seq., Federal Operating Permits for Stationary Sources) of Part II of 9VAC5-80 (Permits for Stationary Sources) or (ii) an affected source as defined in 9VAC5-80-370 and subject to Article 3 (9VAC5-80-360 et seq., Federal Operating Permits for Acid Rain Sources) of Part II of 9VAC5-80.)

Subpart YYYYYY - Ferroalloys Production Facilities, Area Sources.

40 CFR 63.11524 through 40 CFR 63.11543

(manufacture of silicon metal, ferrosilicon, ferrotitanium using the aluminum reduction process, ferrovanadium, ferromolybdenum, calcium silicon, silicomanganese zirconium, ferrochrome silicon, silvery iron, high-carbon ferrochrome, charge chrome, standard ferromanganese, silicomanganese, ferromanganese silicon, calcium carbide or other ferroalloy products using electrometallurgical operations including electric arc furnaces or other reaction vessels)

Subpart ZZZZZZ - Aluminum, Copper, and Other Nonferrous Foundries, Area Sources.

40 CFR 63.11544 through 40 CFR 63.11558

(melting operations at aluminum, copper, and other nonferrous foundries, including the collection of induction, reverberatory, crucible, tower, or dry hearth furnaces used to melt metal ingot, alloyed ingot and/or metal scrap to produce molten metal that is poured into molds to make castings)

Subpart AAAAAAA - Asphalt Processing and Asphalt Roofing Manufacturing Area Sources.

40 CFR 63.11559 through 40 CFR 63.11567

(asphalt processing operations that prepare asphalt flux at standalone asphalt processing facilities, petroleum refineries, and asphalt roofing facilities that include one or more asphalt flux blowing stills; and asphalt roofing manufacturing operations that manufacture asphalt roofing products through a series of sequential process steps depending upon whether the type of substrate used is organic or inorganic)

Subpart BBBBBBB - Chemical Preparations Industry Area Sources.

40 CFR 63.11579 through 40 CFR 63.11588

(any facility-wide collection of chemical preparation operations, including the collection of mixing, blending, milling, and extruding equipment used to manufacture chemical preparations that contain metal compounds for chromium, lead, manganese, and nickel)

Subpart CCCCCCC - Paints and Allied Products Manufacturing Area Sources.

40 CFR 63.11599 through 40 CFR 63.11638

(paints and allied products manufacturing processes, including, weighing, blending, mixing, grinding, tinting, dilution or other formulation, as well as cleaning operations, material storage and transfer, and piping)

Subpart DDDDDDD - Prepared Feeds Manufacturing Area Sources.

40 CFR 63.11619 through 40 CFR 63.11638

(production of animal feed from the point in the process where a material containing chromium or manganese is added, to the point where the finished product leaves the facility, including areas where materials containing chromium and manganese are stored, areas where materials containing chromium and manganese are temporarily stored prior to addition to the feed at the mixer, mixing and grinding processes, pelleting and pellet cooling processes, packing and bagging processes, crumblers and screens, bulk loading operations, and all conveyors and other equipment that transfer feed materials)

Subpart EEEEEEE - Gold Mine Ore Processing and Production Area Sources

40 CFR 63.11640 through 40 CFR 63.11653

(any industrial facility engaged in the processing of gold mine ore that uses any of the following processes: roasting operations, autoclaves, carbon kilns, preg tanks, electrowinning, mercury retorts, or melt furnaces)

Subpart FFFFFFF - Reserved.

Subpart GGGGGGG - Reserved.

Subpart HHHHHHH - Polyvinyl Chloride and Copolymers Production.

40 CFR 63.11860 through 40 CFR 63.12000

(facility-wide collection of PVCPU, storage vessels, heat exchange systems, surge control vessels, wastewater and process wastewater treatment systems that are associated with producing polyvinyl chloride and copolymers)

Appendix A - Test Methods.

Appendix B - Sources Defined for Early Reduction Provisions.

Appendix C - Determination of the Fraction Biodegraded (F_bio) in a Biological Treatment Unit.

Appendix D - Alternative Validation Procedure for EPA Waste and Wastewater Methods.