In accordance with 6 VAC 40-20-90 of the Regulations for Breath Alcohol Testing and
under the authority of the Code of Virginia, the following breath test device is approved
for use in conducting breath tests:
1. The Intoxilyzer, Model 5000, CD/FG5 [previously listed as the 768VA], simulator monitor, equipped with the Virginia test protocol, manufactured by CMI, Inc., Owensboro, Kentucky, utilizing an external printer.
2. The Intox EC/IR II with the Virginia test protocol, manufactured by Intoximeters, Inc., St. Louis, Missouri utilizing an external printer.
In accordance with 6 VAC 40-20-100 of the Regulations for Breath Alcohol Testing and
under the authority of the Code of Virginia, the following supplies are approved for
evidential breath test devices:
1. Mouthpieces that are compatible with the specific testing device for use in conducting breath tests on approved breath test devices
In accordance with 6 VAC 40-20-180 of the Regulations for Breath Alcohol Testing and
under the authority of the Code of Virginia, the following devices are approved for use as
preliminary breath test devices:
- The ALCO-SENSOR, ALCO-SENSOR II, ALCOSENSOR
III, ALCO-SENSOR IV and ALCO-SENSOR FST manufactured by
Intoximeters, Inc., St Louis, Missouri.
- The CMI SD 2 and CMI SD 5, manufactured by Lyon
Laboratories, Barry, United Kingdom.
- The INTOXILYZER 400PA, manufactured by CMI, Inc.,
Owensboro, Kentucky.
- The LIFELOC PBA 3000*, LIFELOC FC10, LIFELOC FC10Plus and LIFELOC FC20, manufactured by Lifeloc Inc., Wheat Ridge, Colorado.
*When used in the direct sensing mode only.
5. The ALCOTEST 6510 and ALCOTEST 6810 manufactured by Draeger Safety Diagnostics, Inc., Durango, Colorado.
